Modeling and Simulation of Fabricated Graphene Nanoplates/Polystyrene Nanofibrous Membrane for DCMD

Membrane distillation is an active technique that provides pure water with very good rejection and could be applied to water of extremely high salinity. The low productivity of membrane distillation needs intensive efforts to be competitive with other desalination techniques. In this current study, a composite (PS/GNP) membrane, which is composed of polystyrene (PS) based and 0.25% weight percent graphene nanoplates (GNP) has been fabricated via electrospinning and compared with the blank PS membrane. SEM, FTIR, contact angle and porosity characterization have been performed, and the results show that the validity of the predefined conditions, and the contact angle of the composite membrane, which is found to be 91.68°, proved the hydrophobic nature of the composite membrane. A numerical simulation using Ansys 2020 software has been introduced to study the performance of the fabricated composite membrane when used in direct contact membrane distillation (DCMD). The numerical model has been validated with experimental work from the literature and showed an excellent match. The blank PS and composite PS/GNP membranes have been investigated and compared at different operating conditions, i.e., hot water supply temperature and system flow rate. The results show that the composite PS/GNP membrane outperforms the blank PS membrane at all studied operating conditions.