Coherent-interface-induced strain in large lattice-mismatched materials: A new approach for modeling Raman shift

Strain engineering as one of the most powerful techniques for tuning optical and electronic properties of Ill-nitrides requires reliable methods for strain investigation. In this work, we reveal, that the linear model based on the experimental data limited to within a small range of biaxial strains (< 0.2%), which is widely used for the non-destructive Raman study of strain with nanometer-scale spatial resolution is not valid for the binary wurtzite-structure group-III nitrides GaN and AlN. Importantly, we found that the discrepancy between the experimental values of strain and those calculated via Raman spectroscopy increases as the strain in both GaN and AlN increases. Herein, a new model has been developed to describe the strain-induced Raman frequency shift in GaN and AlN for a wide range of biaxial strains (up to 2.5%). Finally, we proposed a new approach to correlate the Raman frequency shift and strain, which is based on the lattice coherency in the epitaxial layers of superlattice structures and can be used for a wide range of materials.

Supplementary material (Table S1: Values of bulk phonon deformation potentials and elastic constants for GaN and AlN from each reference used in Table 1, Fig. S1: Lattice parameters of SL layers using Eq. (8), and Fig. S2: Raman mapping using Eq. (7)) is available in the online version of this article at 10.1007/s12274-021-3855-4.