Design and implementation of plasma electron density measurements based on FPGA with all-phase FFT for tokamak...

Plasma electron density is one of the most fundamental parameters when studying tokamak plasma physics, which is widely used in plasma control systems and plasma physics analyses. A hydrogen cyanide laser interferometer is generally applied to measure the plasma electron density in many tokamak devices. Therein, the plasma electron density is calculated by measuring the phase difference between the reference signal and the detector signal. This work provides a new way to realize real-time measurements of the plasma electron density with a phase comparator and processing system based on a field-programmable gate array chip. The system integrates a signal processing module, an all-phase fast Fourier transform (ap-FFT) module realized via matrix operations and phase comparisons, and a network communication module all in one board. This work concludes that the ap-FFT is robust and accurate for phase calculations compared with a windowing FFT. A data-reuse method and a phase shift method are proposed to improve the time resolution and phase range. The phase error is less than 0.1° and the time resolution is 0.025 ms, which is better than hardware methods and traditional software methods. This system is highly flexible with reduced design costs to meet the requirements of a tokamak, which can provide a valuable reference for other tokamak and phase difference comparisons.