Related Experiment Video
Updated: Oct 17, 2025

Rejection of Fluorescence Background in Resonance and Spontaneous Raman Microspectroscopy
Published on: May 18, 2011
Dual-wavelength excitation combined Raman spectroscopy for detection of highly fluorescent samples
Abstract:
As fluorescence is the major limitation in Raman scattering, near-infrared excitation wavelength (>780nm) is preferred for fluorescence suppression in Raman spectroscopy. To reduce the risk of fluorescence interference, we developed a dual-wavelength excitation combined Raman spectroscopy (DWECRS) system at 785 and 830 nm. By a common optical path, each laser beam was focused on the same region of the sample by a single objective lens, and the dual-wavelength excitation Raman spectra were detected by a single CCD detector; in addition, 785 and 830 nm excitation Raman spectra can be directly constructed as combined Raman spectrum in the DWECRS system. The results of pure peanut oil and glycerol indicate that the combined Raman spectrum cannot only reduce fluorescence interference but also keep a high signal-to-noise ratio in the high-wavenumber region. The results of dye-ethanol solutions with different concentrations show that the handheld DWECRS system can be used as a smart method to dodge strong fluorescence. Furthermore, we developed a peak intensity ratio method with the DWECRS system to distinguish different types of edible oils. The peak intensity ratio distribution chart of edible oils showed each oil normalized center was relatively independent and nonoverlapped, which can be used as the basis of edible oil classification analysis. In the future, the DWECRS system has potential to be used as a tool for more complex applications.
Related Concept Videos
Raman Spectroscopy: Overview
However, a small fraction of the scattered light exhibits a frequency shift due to the exchange of energy between the incident photons and...
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Super-resolution Fluorescence Microscopy

