A Method to Realize Efficient Deep-Red Phosphorescent OLEDs with a Broad Spectral Profile and Low Operating Voltages

Organic light-emitting diodes (OLEDs) used as phototherapy light sources require sufficient spectral distribution in the effective wavelength ranges and low operating voltages. Herein, a double emitting layer structure consisting of a red-emitting Ir(piq)₂acac and a deep-red Ir(fliq)₂acac was designed to generate a broad electroluminescence spectrum. An efficient TCTA:CN-T2T exciplex system was used as the host of the emitting layer, facilitating effective energy transfer from the exciplex host to the red and deep-red phosphors. The materials used in the exciplex host were also used as the carrier transport layers to eliminate the energy barriers and thus increase the current density. The hole injection layer structures were varied to examine the hole injection capabilities and the carrier balance. The resulting optimized phosphorescent OLEDs with a broad spectral profile exhibit a 90% coverage ratio in the target ranges from 630 to 690 nm, together with a high peak efficiency of 19.1% (10.2 cd/A and 13.8 lm/W). The proposed device only needs 5.2 V to achieve a power density of 5 mW/cm², implying that the device could be driven via two series-connected button cell batteries. These results illustrate the feasibility of our design concepts and demonstrate the realization of a portable and lightweight OLED phototherapy light source.