Related Experiment Video
Updated: Oct 16, 2025

Reducing Willow Wood Fuel Emission by Low Temperature Microwave Assisted Hydrothermal Carbonization
Published on: May 19, 2019
Self-Compacting Recycled Concrete Using Biomass Bottom Ash
Manuel Cabrera1, M J Martinez-Echevarria2, Mónica López-Alonso2
1Construction Engineering Area, University of Córdoba, 14071 Córdoba, Spain.
Abstract:
In recent years, the use of self-compacting concrete has been a great advantage and garnered undoubted interest in construction. Due to the environmental impact caused by the consumption of natural aggregates in the manufacture of concrete, a more sustainable approach is needed. An approach for more sustainable construction is to use industrial waste such as bottom ash from the combustion of biomass as a replacement for natural aggregates. This research aims to use biomass bottom ash as a replacement for natural sand (10%, 20% and 30% replacement); in addition, by utilizing a crushing process of the bottom ash, the ash has been used as a filler replacement (replacement 20%, 40% and 60%). The fresh and hardened properties have been evaluated according to the standard. The results show the feasibility of using biomass bottom ash in self-compacting concrete, providing a sustainable alternative in order to minimise environmental impacts related to the extraction and depletion of natural resources.
Related Concept Videos
Pozzolans
Fly ash is...
Design Example: Sustainability in Concrete Building
There are multiple approaches to achieve sustainability in a commercial concrete building. For instance, construct a concrete parking area under the building, utilizing pervious concrete paver blocks in open areas to facilitate rainwater collection through an underground...
Accelerated Curing of Concrete
Additives and Fillers in Concrete
The...
Fiber Reinforced Concrete
Pumped Concrete
For direct-acting pumps, the concrete enters the pump via the inlet valve under the action of gravity and suction created by the movement of the piston. This concrete is then forced into the pipeline and out through the outlet valve by the forward movement...

