Enhanced activity towards oxygen electrocatalysis for rechargeable Zn-air batteries by alloying Fe and Co in N-doped carbon
Related Experiment Video
Updated: Oct 14, 2025
Synthesis and Performance Characterizations of Transition Metal Single Atom Catalyst for Electrochemical CO2 Reduction
Published on: April 10, 2018
Fengjiao Yu1, Qi Ying1, Shaofeng Ni1
1State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China. yangy@njtech.edu.cn.
Abstract:
Large-scale application of rechargeable Zn-air batteries requires low-cost electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) as alternatives to noble metals. Herein, FeCo nanoparticles embedded in N-doped carbon (FeCo/N-C) were prepared by a two-step pyrolysis route. FeCo/N-C exhibits excellent activities toward both the ORR (half-wave potential of 0.84 V) and OER (overpotential of 345 mV at 10 mA cm-2), which are comparable to those of commercial Pt/C and RuO2, and by far exceeding their counterparts Fe/N-C and Co/N-C. Furthermore, the FeCo/N-C catalyst was evaluated in a rechargeable Zn-air battery for the full-cell test. The FeCo/N-C based battery is more durable with a smaller round-trip overpotential after 800 cycles than the battery using an expensive Pt/C + RuO2 mixture catalyst.
