Selectivity adsorption of sulfate by amino-modified activated carbon during capacitive deionization

ABSTRACTCapacitive deionization (CDI) is an environmentally friendly desalination technique with low energy consumption. However, unmodified carbon electrode materials have poor sulfate selectivity and adsorption capacity. In this work, to improve sulfate selectivity, we prepared activated carbon materials loaded with different amino contents by grafting amino groups via acid treatment for different times. In the competitive ion adsorption experiments, the sulfate selectivity of AC was only 0.64 and the amino-modified AC increased by 1.98-2.52 times due to the formation of stronger hydrogen bonds between the amino group and sulfate. AC-NH₂-4 had the best selectivity and the sulfate selective coefficient was 2.25. The desorption of sulfate was 92.46% within one hour. In addition, the surface of the amino-modified activated carbon showed significantly improved electrochemical properties and better capacitance. The specific capacitance of amino-modified AC in different electrolyte solutions was consistent with the competitive adsorption results. The specific capacitance of amino-modified AC in Na₂SO₄ electrolyte solution was the highest. The modified electrode material also had the advantages of a higher adsorption capacity and excellent regeneration performance after continuous electric adsorption-desorption cycles. Therefore, it may have development potential to selectively adsorb sulfate in practical applications.