Changes in Frequency and Mode Shapes Due to Damage in Steel-Concrete Composite Beam

This study presents an analysis of changes in the vibration frequency and mode of vibration of a composite beam due to damage. A steel-concrete composite beam was considered, for which numerical analysis (RFE model) and experimental tests were conducted. Two levels of damage were introduced to the beam. To determine the changes in the mode of vibration before and after the damage, the modal assurance criterion (MAC) and its partial variation (PMAC) were applied. The curvature damage factor (CDF) was used to determine the changes in the modal curvature. The natural frequencies were sensitive to the introduced damage. The results show that the MAC is not effective in determining the location of damage in the connection plane. Two different coefficients were introduced to locate the damage. The PMAC was used for sections of subsequent modes of vibration and allowed effectively locating the damage. The CDF considered simultaneous changes in the curvatures of all vibration modes and was effective in locating the damage in the connection plane.