Related Experiment Video
Updated: Oct 13, 2025

Preparation of Aligned Steel Fiber Reinforced Cementitious Composite and Its Flexural Behavior
Published on: June 27, 2018
Prediction of Deflection of Reinforced Concrete Beams Considering Shear Effect
1Department of Civil, Architectural and Environmental System Engineering Graduate School, Sungkyunkwan University, Suwon 16419, Korea.
Abstract:
This paper proposes a method to evaluate the effect of shear on the deflection of reinforced concrete (RC) beams. The deflection of RC beams due to the effects of flexural and shear cracks shows different results from those obtained from the elastic theory. The effect of shear on deflection was compared and analyzed in this study, on the basis of experimental results and elastic theory using the virtual work method. The shear effect on the deflection of RC beams by elastic theory was extremely small. However, experimental results showed a difference of over 40% from the results predicted by elasticity theory. In this study, a new method was developed to reasonably predict the deflection of flexure-critical RC beams using the deflection incremental coefficient due to shear. The proposed method was compared with the existing experimental results obtained from the literature for verification. As a result of the comparison, the deflection obtained using ACI 318-19 underestimated the actual deflection by approximately 33%, whereas the deflection obtained by the proposed method predicted the experimental results relatively accurately.
Related Concept Videos
Shearing Stresses in a Beam: Problem Solving
Deflection of a Beam
Singularity functions, described in an earlier lesson, are powerful mathematical tools that represent discontinuities within a function commonly encountered in structural loading...
Beams with Unsymmetric Loadings
The first moment-area theorem determines the slope at any point on the beam. This theorem indicates that the change in slope between two points on a beam...
Deformation of a Beam under Transverse Loading
The insights from the bending moment diagram extend to...
Shear on the Horizontal Face of a Beam Element
Elastic Curve from the Load Distribution
For all beams, the analysis of the beam's reaction to distributed loads begins by understanding the relationship between a beam's load and the resulting shear forces and bending moments.

