Related Experiment Video
Updated: Oct 10, 2025

Calibration Procedures for Orthogonal Superposition Rheology
Published on: November 18, 2020
Viscosity Measurements of Three Base Oils and One Fully Formulated Lubricant and New Viscosity Correlations for the
Arno Laesecke1,2, Clemens Junker3, Damian S Lauria1
1National Institute of Standards and Technology, Boulder, CO 80305, USA.
Abstract:
The viscosities of three pentaerythritol tetraalkanoate ester base oils and one fully formulated lubricant were measured with an oscillating piston viscometer in the overall temperature range from 275 K to 450 K with pressures up to 137 MPa. The alkanoates were pentanoate, heptanoate, and nonanoate. Three sensing cylinders covering the combined viscosity range from 1 mPa·s to 100 mPa·s were calibrated with squalane. This required a re-correlation of a squalane viscosity data set in the literature that was measured with a vibrating wire viscometer, with an estimated extended uncertainty of 2 %, because the squalane viscosity formulations in the literature did not represent this data set within its experimental uncertainty. In addition, a new formulation for the viscosity of squalane at atmospheric pressure was developed that represents experimental data from 169.5 K to 473 K within their estimated uncertainty over a viscosity range of more than eleven orders of magnitude. The viscosity of squalane was measured over the entire viscometer range, and the results were used together with the squalane correlations to develop accurate calibrating functions for the instrument. The throughput of the instrument was tripled by a custom-developed LabVIEW application. The measured viscosity data for the ester base oils and the fully formulated lubricant were tabulated and compared with literature data. An unpublished viscosity data set for pentaerythritol tetrapentanoate measured in this laboratory in 2006 at atmospheric pressure from 253 K to 373 K agrees with the new data within their experimental uncertainty and confirms the deviations from the literature data. The density data measured in this project for the three base oils deviate from the literature data in a way that is by sign and magnitude consistent with the deviations of the viscosity data. This points to differences in the sample compositions as the most likely cause for the deviations.
More Related Videos
10:38Measurement of the Rheology of Crude Oil in Equilibrium with CO2 at Reservoir Conditions
Published on: June 6, 2017
10:28Experimental Measurement of Settling Velocity of Spherical Particles in Unconfined and Confined Surfactant-based Shear Thinning Viscoelastic Fluids
Published on: January 3, 2014
Related Concept Videos
Viscosity of Fluid
Viscosity
The SI unit of viscosity is...
Surface Tension, Capillary Action, and Viscosity
The various IMFs between identical molecules of a substance are examples of cohesive forces. The molecules within a liquid are surrounded by other molecules and are attracted equally in all directions by the cohesive forces within the liquid. However, the molecules on the surface of a liquid are attracted only by about one-half as many molecules. Because of the unbalanced molecular attractions on the surface molecules, liquids contract to form a shape that minimizes the number...
Design Example: Deciding Thickness of Lubricating Fluid in a Shaft
To calculate the required thickness of the lubricant layer, the tangential velocity at the shaft's surface must first be determined. This velocity is calculated by converting the rotational speed to angular...
Measurement of Fluid Pressure
A basic form of manometer is the piezometer, a vertical tube open at the top and filled with the same...
Vapor Pressure of Fluid
When a liquid is placed in a closed container with a small air space, and the space is evacuated, vapor molecules will...