Related Experiment Video
Updated: Oct 10, 2025

A Gusseted Thermogradient Table to Control Soil Temperatures for Evaluating Plant Growth and Monitoring Soil Processes
Published on: October 22, 2016
Thermal and Optical Properties of the Sunspace Casing as Factors Influencing Temperature Rise in Greenhouse Systems
1Faculty of Civil Engineering and Architecture, Lublin University of Technology, 40 Nadbystrzycka Str., 20-618 Lublin, Poland.
Abstract:
In sunspaces, there is an observable temperature rise above the external air temperature, caused by solar gains and the buffering effect of their enclosure. In addition, their external partitions form a barrier preventing the direct influence of the external environment and delaying the natural deterioration of elevation surface. In the paper, the temperature rise in a glazed balcony attached to a typical flat in a multifamily building, together with the energy demand in the living zone, were assessed with the use of dynamic computer simulations. Ten variants of the sunspace casing were analysed, with different thermal and solar energy transmittance of the glazing (which is a novel subject in the research area). This enabled us to evaluate average values of the temperature reduction factor during the year and to choose the most efficient variant of the sunspace external partitions. It turned out to be an insulated, double-glazed casing with a spectrally selective coating (type O 21), combining high insulative properties with high solar transmittance. These features allowed the temperature in the sunspace to rise by almost 10°C (compared with the external air) and lower total energy demand in the flat by 33% (compared with a flat with an open balcony).
More Related Videos
Related Concept Videos
Thermal Insulation in Masonry Walls
External insulation can be applied using an Exterior Insulation and Finish System (EIFS), which involves affixing panels of plastic foam to the wall and covering them with a polymeric stucco reinforced with glass fiber mesh....
Conduction, Convection and Radiation: Problem Solving
In order to solve a problem related to heat transfer, first of all, the situation needs to be examined to determine the type of heat transfer involved. This could...
Radiation: Applications
The average...
Mechanisms of Heat Transfer II
Thermal expansion and Thermal stress: Problem Solving
To solve the problem, first, identify the known and unknown quantities. The initial length (L) of the bridge is 1275 m, the coefficient of linear expansion (α) for steel is 12 x 10-6/°C, and the change in...
Mechanism of heat transfer

