The active guidewire technique versus standard technique as different way to approach ureteral endoscopic stone...

One of the greatest challenges in semi-rigid ureteroscopies, for both stones and tumors, is the control of endoscopic vision and the maintenance of low intracavitary liquid pressure. We present a comparison between two operative techniques: in the first method an ordinary guide wire (diameter 0.032'') is used for the procedure; in the second one a 5 Fr ureteral catheter replaces the guidewire (we called it "Active guidewire") Methods We compared 50 semirigid ureteroscopies (sURS) performed using the active guidewire with another 50 procedures conducted with a classic guidewire. We evaluated the difference in operating times, quality of endoscopic vision, periprocedural infections rate and stone-free rate.

The use of active guidewire has considerably reduced the standardized operating times per unit stone-volume by about 39%. Vision quality has improved considerably thanks to the continuous flow in-and-out. Consequently, periprocedural infections decreased (3% vs 30%) and the stone-free rate rose from 86% to 92%.

Employing an "active guidewire" instead of the standard guidewire, the risk of complications related to high pressures and operating time is considerably lower, as well as better treatment quality thanks to the cleaner vision. This technique has proven to be safe as well as easy to apply, and in our belief is to be preferred whenever the ureter accepts without forcing, both the presence of the catheter and the semi-rigid 7 F ureteroscope.