Multi-level multi-leaf collimators: Optimization of layer thicknesses and a feasibility study

The function of multi-leaf collimators (MLC) is to modulate and shape the intensity of a radiotherapy beam by either blocking or unblocking beamlets. A variation on this functionality is tested in this work wherein the MLC is split into layers, with each layer attenuating the beam by a different amount. In this design, full blocking of a beamlet occurs only if all layers are blocked. This work suggests that such a device, a multi-layer MLC (MLMLC), can deliver dose distributions like a single layer MLC can deliver while requiring less time and monitor units (MU) METHODS: Optimal fluences were made for prostate plans using the Eclipse v13.6. An algorithm was developed to create step-and-shoot MLMLC patterns to match these optimal fluences when using up to six layers of MLC. Twelve MLMLC plans were made in total. These patterns were imported back into Eclipse as equivalent tungsten compensators and doses were calculated. Dose-volume histogram (DVH) values, total monitor units (MU), and total time to deliver were compared between arc-style MLMLC plans and nine-field step and shoot IMRT plans created completely in Eclipse using a single layer MLC.

When using three or more layers, specified DVH values between the two sets agreed to within 5% while requiring roughly half as much time to deliver and about 20% fewer MU.

Demonstrated that having multi-layer MLC can deliver dose distributions like a single layer MLC with less time and monitor units.