Optimization of methionine in inhalable High-dose Spray-dried amorphous composite particles using response surface...

The influence of amino acids, other than leucine, in improving aerosolization of inhalable powders has not been widely explored. This detailed study focused on the use of methionine, another promising endogenous amino acid, in high dose spray-dried co-amorphous powders by investigating the influence of methionine proportion (0 - 20% ^w/_w), and feed concentration (0.2 - 0.8% ^w/_v) on aerosolization of kanamycin, a model drug, using a design of experiment approach. Low frequency Raman spectroscopy was used to assess the stability of the powders stored at 25 °C/53% relative humidity over 28 days. An increase in concentration of methionine was associated with an increase in fine particle fraction (FPF), with the highest FPF of 84% being achieved at 20% ^w/_w and 0.2% ^w/_v feed concentration. With an increase in feed concentration, both yield and particle size increased for all formulations; the FPF did not change except for kanamycin only formulation in which it decreased. During storage at high humidity, similar aerosolization stabilities were offered by different proportions of methionine although methionine crystallized out in all formulations. Furthermore, the crystallization was accompanied by surface enrichment of methionine on the particles. This study suggests that there is a direct relationship between methionine content and aerosolization for kanamycin-methionine amorphous matrices but feed concentration has little effect. In addition, methionine proportion has no effect on physical stability of such matrices at high humidity.