Fracture Surface Behavior of 34CrNiMo6 High-Strength Steel Bars with Blind Holes under Bending-Torsion Fatigue

The present study evaluates the fracture surface response of fatigued 34CrNiMo6 steel bars with transverse blind holes subjected to bending with torsion loading. The analysis of the geometric product specification was performed by means of height parameters Sx, functional volume parameters Vx, and fractal dimension Df. Surface topography measurements were carried out using an optical profilometer with focus variation technology. The experimental results show that the doubling the bending to torsion moment ratio B/T from B/T = 1 to B/T = 2, maintaining the same normal stress amplitude, greatly reduces both Sa, Vv as well as the fractal dimension Df of the analyzed specimen fractures by 32.1%, 29.8%, and 16.0%, respectively. However, as expected, a two-fold increase in the B/T ratio, maintaining the same normal stress amplitude, resulted in a larger number of cycles to fatigue crack initiation, Ni, which can be explained by the lower shear stress level. These experiments prove that parameters Sx, Vx, Df are smaller for larger Ni values, which is an important finding. In addition, it was found a high consistency of surface topography measurements for the two sides of the broken specimens. The proposed methodology is both reliable and applicable for other engineering applications involving different geometries and loading conditions.