Fabrication of Hollow Nanocones Membrane with an Extraordinary Surface Area as CO₂ Sucker

Recently, more and more attention has been paid to the development of eco-friendly solid sorbents that are cost-effective, noncorrosive, have a high gas capacity, and have low renewable energy for CO₂ capture. Here, we claimed the fabrication of a three-dimensional (3D) film of hollow nanocones with a large surface area (949.5 m²/g), a large contact angle of 136.3°, and high surface energy. The synthetic technique is based on an electrochemical polymerization process followed by a novel and simple strategy for pulling off the formed layers as a membrane. Although the polymer-coated substrates were reported previously, the membrane formation has not been reported elsewhere. The detachable capability of the manufactured layer as a membrane braked the previous boundaries and allows the membrane's uses in a wide range of applications. This 3D hollow nanocones membrane offer advantages over conventional ones in that they combine a π-electron-rich (aromatic ring), hydrophobicity, a large surface area, multiple amino groups, and a large pore volume. These substantial features are vital for CO₂ capturing and storage. Furthermore, the hydrophobicity characteristic and application of the formed polymer as a CO₂ sucker were investigated. These results demonstrated the potential of the synthesized 3D hollow polymer to be used for CO₂ capturing with a gas capacity of about 68 mg/g and regeneration ability without the need for heat up.