Related Experiment Video
Updated: Oct 7, 2025

Preparation of Graphene Liquid Cells for the Observation of Lithium-ion Battery Material
Published on: February 5, 2019
Single-dispersed polyoxometalate clusters embedded on multilayer graphene as a bifunctional electrocatalyst for
Jie Lei1, Xiao-Xiang Fan1, Ting Liu1
1State Key Laboratory for Physical Chemistry of Solid Surfaces, Department of Chemistry, College of Chemistry and Chemical Engineering, iChem (Collaborative Innovation Center of Chemistry for Energy Materials), Innovation Laboratory for Sciences and Technologies of Energy Materials of Fujian Province (IKKEM), Xiamen University, Xiamen, Fujian, 361005, China.
Abstract:
The redox reactions occurring in the Li-S battery positive electrode conceal various and critical electrocatalytic processes, which strongly influence the performances of this electrochemical energy storage system. Here, we report the development of a single-dispersed molecular cluster catalyst composite comprising of a polyoxometalate framework ([Co4(PW9O34)2]10-) and multilayer reduced graphene oxide. Due to the interfacial charge transfer and exposure of unsaturated cobalt sites, the composite demonstrates efficient polysulfides adsorption and reduced activation energy for polysulfides conversion, thus serving as a bifunctional electrocatalyst. When tested in full Li-S coin cell configuration, the composite allows for a long-term Li-S battery cycling with a capacity fading of 0.015% per cycle after 1000 cycles at 2 C (i.e., 3.36 A g-1). An areal capacity of 4.55 mAh cm-2 is also achieved with a sulfur loading of 5.6 mg cm-2 and E/S ratio of 4.5 μL mg-1. Moreover, Li-S single-electrode pouch cells tested with the bifunctional electrocatalyst demonstrate a specific capacity of about 800 mAh g-1 at a sulfur loading of 3.6 mg cm-2 for 100 cycles at 0.2 C (i.e., 336 mA g-1) with E/S ratio of 5 μL mg-1.

