Experimental measurements of femoral primary stability in two cementless posterior-stabilized knee replacement...

Sufficient primary stability through interference fit is required for bone ingrowth and subsequent long-term fixation of cementless knee replacement implants, and can be evaluated in experimental testing. In this study, primary stability of a novel posterior-stabilized (PS) femoral component (Attune PS) and a contemporary PS component (Triathlon PS) were analyzed, and compared to previous outcomes of cruciate-retaining (CR) implants. Potential bone ingrowth was evaluated by measuring micromotions over the implant-bone interface in six cadaveric femur pairs under two loading conditions using digital image correlation, for a paired comparison of the PS implants. Push-off forces required to achieve implant removal under high-flexion were determined as a measure of implant fixation. Achieved interference fit was determined by reconstructing the implant positions through use of separate implant and resected bone geometries. Lower overall micromotions and a higher average push-off force were measured in the Attune PS implant, indicating increased initial fixation compared to the Triathlon PS design. Interference fit was significantly higher for the Attune PS and was related to lower gait micromotions in Triathlon and overall PS groups. Based on reported clinical results and the comparison with available CR implant results, both PS implants are expected to provide sufficient initial clinical stability.