Automated Manipulation of Miniature Objects Underwater Using Air Capillary Bridges: Pick-and-Place, Surface Cleaning,...

Various insects can entrap and stabilize air plastrons and bubbles underwater. When these bubbles interact with surfaces underwater, they create air capillary bridges that de-wet surfaces and even allow underwater reversible adhesion. In this study, a robotic arm with interchangeable three-dimensional (3D)-printed bubble-stabilizing units is used to create air capillary bridges underwater for manipulation of small objects. Particles of various sizes and shapes, thin sheets and substrates of diverse surface tensions, from hydrophilic to superhydrophobic, can be lifted, transported, placed, and oriented using one- or two-dimensional arrays of bubbles. Underwater adhesion, derived from the air capillary bridges, is quantified depending on the number, arrangement, and size of bubbles and the contact angle of the counter surface. This includes a variety of commercially available materials and chemically modified surfaces. Overall, it is possible to manipulate millimeter- to sub-millimeter-scale objects underwater. This includes cleaning submerged surfaces from colloids and arbitrary contaminations, folding thin sheets to create three-dimensional structures, and precisely placing and aligning objects of various geometries. The robotic underwater manipulator can be used for automation and control in cell culture experiments, lab-on-chip devices, and manipulation of objects underwater. It offers the ability to control the transport and release of small objects without the need for chemical adhesives, suction-based adhesion, anchoring devices, or grabbers.