Rapid detection and quantitation of dipicolinic acid from Clostridium botulinum spores using mixed-mode liquid...

Analysis of the dipicolinic acid (DPA) released from Clostridium botulinum spores during thermal processing is crucial to obtaining a mechanistic understanding of the factors involved in spore heat resistance and related food safety applications. Here, we developed a novel mixed-mode liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for detection of the DPA released from C. botulinum type A, nonproteolytic types B and F strains, and nonpathogenic surrogate Clostridium sporogenes PA3679 spores. DPA was retained on a mixed-mode C18/anion exchange column and was detected using electrospray ionization (ESI) positive mode within a 4-min analysis time. The intraday and interday precision (%CV) was 1.94-3.46% and 4.04-8.28%, respectively. Matrix effects were minimal across proteolytic type A Giorgio-A, nonproteolytic types QC-B and 202-F, and C. sporogenes PA3679 spore suspensions (90.1-114% of spiked DPA concentrations). DPA recovery in carrot juice and beef broth ranged from 105 to 118%, indicating limited matrix effects of these food products. Experiments that assessed the DPA released from Giorgio-A spores over the course of a 5-min thermal treatment at 108 °C found a significant correlation (R = 0.907; P < 0.05) between the log reduction of spores and amount of DPA released. This mixed-mode LC-MS/MS method provides a means for rapid detection of DPA released from C. botulinum spores during thermal processing and has the potential to be used for experiments in the field of food safety that assess the thermal resistance characteristics of various C. botulinum spore types.