An experimental/numerical investigation of non-reacting turbulent flow in a piloted premixed Bunsen burner

In this paper, an experimental study of the non-reacting turbulent flow field characteristics of a piloted premixed Bunsen burner designed for operational at elevated pressure conditions is presented. The generated turbulent flow fields were experimentally investigated at atmospheric and elevated pressure by means of high-speed particle image velocimetry (PIV). The in-nozzle flow through the burner was computed using large-eddy simulation (LES), and the turbulent flow field predicted at the burner exit was compared against the experimental results. The findings show that the burner yields a reasonably homogeneous, nearly isotropic turbulence at the nozzle exit with highly reproducible boundary conditions that can be well predicted by numerical simulations. Similar levels of turbulence intensities and turbulent length scales were obtained at varied pressures and bulk velocities with turbulent Reynolds numbers up to 5300. This work demonstrates the burner's potential for the study of premixed flames subject to intermediate and extreme turbulence at the elevated pressure conditions found in gas turbine combustors.