Polysaccharides Used in Biosorbents Preparation for Organic Dyes Retaining from Aqueous Media

Natural polymers can themselves be efficient as materials with biosorptive properties but can also be used to transform microbial biomass into an easy-to-handle form, respectively, into biosorbents, through immobilization. The article aims to study biosorbents based on residual microbial biomass (Saccharomyces pastorianus yeast, separated after the brewing process by centrifugation and dried at 80 °C) immobilized in sodium alginate. The biosorptive properties of this type of biosorbent (spherical particles 2 and 4 mm in diameter) were studied for removal of reactive dye Brilliant Red HE-3B (with concentration in range of 16.88-174.08 mg/L) from aqueous media. The paper aims at three aspects: (i) the physico-chemical characterization of the biosorbent (Scanning Electron Microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDX) and Fourier Transform Infrared (FTIR) spectra); (ii) the modeling of biosorption data in order to calculate the quantitative characteristic parameters using three equilibrium isotherms (Langmuir, Freundlich, and Dubinin-Radushkevich-DR); and (iii) the evaluation of thermal effect and the possible mechanism of action. The results of the study showed that biosorption capacity evaluated by Langmuir (I) model is 222.22 mg/g (ϕ = 2 mm) and 151.51 mg/g (ϕ = 4 mm) at 30 °C, and the free energy of biosorption (E) is in the range of 8.45-13.608 KJ/mol (from the DR equation). The values of thermodynamic parameters suggested an exothermic process due the negative value of free Gibbs energy (ΔG⁰ = -9.031 kJ/mol till -3.776 kJ/mol) and enthalpy (about ΔH⁰ = -87.795 KJ/mol). The obtained results underline our finding that the immobilization in sodium alginate of the residual microbial biomass of Saccharomyces pastorianus led to an efficient biosorbent useful in static operating system in the case of effluents with moderate concentrations of organic dyes.