Flexible TiCu Thin Films with Dual Antimicrobial and Piezoresistive Characteristics

The eradication of microorganisms from high traffic surfaces to prevent either viral or bacterial infections represents an urgent need, mainly in the scope of the present pandemic scenario. In this context, this work explores the dual functionality of titanium-copper thin films as pressure elements with antimicrobial properties, aiming for the implementation of touch and sensing capabilities in high traffic surfaces. Copper was employed as the antibacterial agent within a titanium matrix. The film's geometry and deposition parameters were varied in order to optimize antimicrobial and piezoresistive response. A considerable antimicrobial response has been obtained, increasing the copper amount (from 23 to 63 at. %) in the titanium matrix, leading to an outstanding 8 log₁₀ CFU bacterial reduction in the case of Escherichia coli. Moreover, for the same amount of copper, the piezoresistive sensibility of the thin films increases up to a maximum gauge factor of 5.18 ± 0.09, which indicates an adequate electromechanical behavior for sensing applications. Our findings demonstrate the best combined antimicrobial and piezoresistive characteristics for the films with a Cu content of 63 at. %, indicating a potential use of these films for electromechanical sensor applications.