Related Experiment Video
Updated: Oct 2, 2025

Microfluidic Devices for Characterizing Pore-scale Event Processes in Porous Media for Oil Recovery Applications
Published on: January 16, 2018
Review on physical and chemical factors affecting fines migration in porous media
Yulong Yang1, Weifeng Yuan1, Jirui Hou1
1State Key Laboratory of Petroleum Resources and Prospecting, China University of Petroleum, Beijing 102200, China.
Abstract:
Permeability reduction and formation damage in porous media caused by fines (defined as unconfined solid particles present in the pore spaces) migration is one of the major reasons for productivity decline. It is well accepted that particle detachment occurs under imbalanced torques arising from hydrodynamic and adhesive forces exerted on attached particles. This paper reviewed current understanding on primary factors influencing fines migration as well as mathematical formulations for quantification. We also introduced salinity-related experimental observations that contradict theoretical predictions based on torque balance criteria, such as delayed particle release and attachment-detachment hysteresis. The delay of particle release during low-salinity water injection was successfully explained and formulated by the Nernst-Planck diffusion of ions in a narrow contact area. In addition to the widely recognized explanation by surface heterogeneity and the presence of low-velocity regions, we proposed a hypothesis that accounts for the shifting of equilibrium positions, providing new insight into the interpretation of elusive attachment-detachment hysteresis both physically and mathematically. The review was finalized by discussing the quantification of anomalous salinity effect on adhesion force at low- and high-salinity conditions.
Related Concept Videos
Factors Affecting Dissolution: Particle Size and Effective Surface Area
Pore Size Distribution
Adequate...
Factors Affecting Workability
Factors Affecting Dissolution: Drug Permeability, Stability and Stereochemistry
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...
Fineness of Cement
Direct...

