Related Experiment Video
Updated: Oct 2, 2025

Synthesis of Programmable Main-chain Liquid-crystalline Elastomers Using a Two-stage Thiol-acrylate Reaction
Published on: January 19, 2016
Influence of Pentaerythritol Tetraacrylate Crosslinker on Polycarboxylate Superplasticizer Performance in
Yu Gao1, Hongwei Zhao1,2, Guang Chen1
1School of Material Science and Engineering, Hunan University of Science and Technology, Xiangtan 411201, China.
Abstract:
In this work, a crosslinked polycarboxylate superplasticizer (crosslinked-PC) was synthesized via the free radical polymerization reaction. Pentaerythritol tetraacrylate (PETA) was used as the crosslinked agent. A comparative comb-like polycarboxylate superplasticizer (comb-like-PC) was prepared under the same reaction conditions. The dispersion retention capacity, dispersion capability, hydration characteristics of the cement paste and setting time were investigated in detail. At the dosage of 0.6% bwoc, the fluidity of the cement/crosslinked-PC paste was about 340 mm, which was 40~50 mm larger than the cement/comb-like-PC paste. The dispersion retention capacity of the cement/crosslinked-PC paste was observed to be much superior due to higher adsorbed amounts on the cement particles. Moreover, the cement/crosslinked-PC paste exhibited the initial and final setting durations of 196 and 356 min, respectively, which indicated an enhancement of 18 and 68 min compared to the cement/comb-like paste. The crosslinked copolymers exhibit a stronger retardation effect than the comb-like copolymers due to their enhanced adsorbed amounts and stronger steric hindrance effect. This is further illustrated by the characterization of the hydration process and hydration products. It can be concluded that it is feasible to improve the dispersive capacity and the dispersion retention capacity of PC by changing the molecule structure from comb-like to slightly crosslinked.
More Related Videos
09:06The Effect of Construction and Demolition Waste Plastic Fractions on Wood-Polymer Composite Properties
Published on: June 7, 2020
06:27Expression of Cementitious Pore Solution and the Analysis of Its Chemical Composition and Resistivity Using X-ray Fluorescence
Published on: September 23, 2018
Related Concept Videos
Superplasticizers
Plasticizers
Plasticizers function by using surface-active agents to create repulsive electrostatic forces between cement particles. This dispersion enhances the concrete's...
Hydration of Cement
Strength and Heat of Hydration
The heat of hydration for each cement compound is significant; for instance, tricalcium aluminate (C3A) and...
Pozzolans
Fly ash is...
Types of Cement I
Type I (Ordinary Portland Cement) is widely used for general construction where special properties are not required. It has moderate sulfate resistance and heat of hydration.
Type II (Modified Cement) offers moderate resistance to sulfate attack and a lower rate of heat development compared to Type I. It is suitable for structures in...