The Grain Growth Control of ZnO-V2O5 Based Varistors by PrMnO3 Addition
Maofeng Xu1,2,3, Changkun Cai1,2,3, Yu Shi1
1School of Materials and Metallurgy, Inner Mongolia University of Science and Technology, Baotou 014010, China.
Abstract:
In this study, the grain growth behaviour of ZnO-V2O5-based ceramics with 0.25-0.75 mol% additions of PrMnO3 was systematically investigated during sintering from 850 °C to 925 °C. with the aim to control the ZnO grain size for their application as varistors. It was found that with the increased addition of PrMnO3, in addition to the decrease in the average grain size, the grain size distribution also narrowed and eventually changed from a bimodal to unimodal distribution after a 0.75 mol% PrMnO3 addition. The grain growth control was achieved by a pinning effect of the secondary ZnCr2O4 and PrVO4 phases at the ZnO grain boundaries. The apparent activation energy of the ZnO grain growth in these ceramics was found to increase with increased additions of PrVO4, hence the observed reduction in the ZnO grain sizes.
Related Concept Videos
Ziegler–Natta Chain-Growth Polymerization: Overview
Zener Diodes
Precipitate Formation and Particle Size Control
The obtained precipitate should be either a pure substance of known composition or easily converted to one by a simple process, such as ignition or drying. In addition, the precipitate should be insoluble and easily filterable. In general, filterability...


