Related Experiment Video
Updated: Oct 2, 2025

Fabrication of Schottky Diodes on Zn-polar BeMgZnO/ZnO Heterostructure Grown by Plasma-assisted Molecular Beam Epitaxy
Published on: October 23, 2018
SiC Heterojunction Trench MOSFET with a Buried P-Type Pillar for the Low Gate-Drain Charge and Switching Loss
Shenglong Ran1, Zhiyong Huang1, Shengdong Hu1
1Chongqing Engineering Laboratory of High Performance Integrated Circuits, School of Microelectronics and Communication Engineering, Chongqing University, Chongqing 400044, China.
Abstract:
A novel Silicon-Carbide heterojunction U-MOSFET embedded a P-type pillar buried in the drift layer (BP-TMOS) is proposed and simulated in this study. When functioning in the on state, the merged heterojunction structure will control the parasitic body diode, and the switching loss will decrease. Moreover, to lighten the electric field on the gate oxide corner, a high-doped L-shaped P+ layer near the heterojunction beneath the gate oxide was introduced; thus, the gate oxide reliability improved. A p-type pillar is introduced in the drift layer. The p-type pillar can assistant the drift layer to deplete. Thus, the specific on-resistance for BP-TMOS can be reduced with an increase in the N-drift region's doping concentration. Compared to the traditional SiC MOSFET (C-TMOS), the specific on-resistance decreased by 20.4%, and the breakdown voltage increased by 53.7% for BP-TMOS, respectively. Meanwhile the device exhibits a 55% decrease and a 69.7% decrease for the switching loss and gate to drain charge.
Related Concept Videos
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
P-N junction

