Related Experiment Video
Updated: Oct 2, 2025

Taking Advantage of Reduced Droplet-surface Interaction to Optimize Transport of Bioanalytes in Digital Microfluidics
Published on: November 10, 2014
New approach towards mitigating photovoltaic panels soiling by dew flowing
Dounia Dahlioui1, Bouchra Laarabi1, Lassana Traore1
1Physics of Semiconductors and Solar Energy Research Team (PSES), Energy Research Center, ENS, Mohammed V University in Rabat, Rabat, Morocco.
Abstract:
Soiling has a crucial importance regarding its impact mainly for countries that have high soiling levels, dust storms, water scarcity and a great solar energy potential as the case of Morocco. Soiling mitigation is therefore mostly required during spring, due to higher pollen concentration, and summer, due to the lack of heavy precipitation. In this work, systematic measurements of soiling ratio were made in Rabat, city of north-western Morocco, during almost 1 year. Soiling has been evaluated considering the effect of dual-axis tracking that was compared to photovoltaic (PV) on fixed structure. A soiling rate of about 0.22%/day has been found for static PV while only 0.1% was found for PV on tracker. An additional approach of cleaning has been proposed in this paper which aims to use dew water. Using glass samples that were exposed to real environmental conditions, similar to the exposure conditions of PV panels, the soiling ratio was determined. At sunrise time, the subsequent change of the glass sample, from the horizontal position at night into the position of 30° tilt angle during the day, is performed to promote dew flow by the force of gravity acting on the droplets of dew. It has been found that relying only on the change of tilt angle, the average soiling losses were only 3.8% compared with 11.8% for fixed PV. This approach can reduce soiling similarly to solar trackers.
More Related Videos
12:21Close-Space Sublimation-Deposited Ultra-Thin CdSeTe/CdTe Solar Cells for Enhanced Short-Circuit Current Density and Photoluminescence
Published on: March 6, 2020
07:32Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization
Published on: January 29, 2017