On-Line Foreign Object Detection Using Double DD Coils in an Inductive Wireless Power Transfer System

This paper proposes an on-line method for foreign object detection in a double DD coil system. The foreign object is detected by real-time measurement of the mutual inductance between the transfer pads. Measurement of the mutual inductance between coils can be performed at the start, during initialisation, or during the wireless power transfer. The coils in the double DD coil structure can be used separately; one coil can be used for power transfer and the other can be used for the mutual inductance measurement. The mutual inductance measurement is based on the voltage measurement across the open circuit receiver coil. The measured value of mutual inductance between the transmitter and the receiver pad can be used in a control algorithm and in a foreign object detection algorithm. Additionally, a 2DDq coil structure can be used as a replacement for the double DD coil structure, which increases the power transfer density. The DD coils in the double DD coil structure can also be driven using two phase-shifted voltages, which enables better location and detection of foreign objects. The method also helps to differentiate the mutual inductance change due to the distance change from the mutual inductance change due to the presence of a foreign object.