Related Experiment Video
Updated: Oct 2, 2025

Synthesis and Performance Characterizations of Transition Metal Single Atom Catalyst for Electrochemical CO2 Reduction
Published on: April 10, 2018
Enhanced wettability improves catalytic activity of nickel-functionalized activated carbon cathode for hydrogen
Daniel A Moreno-Jimenez1, Kyoung-Yeol Kim1
1Department of Environmental and Sustainable Engineering, University at Albany, State University of New York, 1400 Washington Avenue, Albany, NY 12222, USA.
Abstract:
A nickel-functionalized activated carbon (AC/Ni) was recently developed for microbial electrolysis cells (MECs) and showed a great potential for large-scale applications. In this study, the electroactivity of the AC/Ni cathode was significantly improved by increasing the oxygen (16.9%) and nitrogen (124%) containing species on the AC using nitric acid oxidation. The acid-treated AC (t-AC) showed 21% enhanced wettability that consequently reduced the ohmic resistance (6.7%) and the charge transfer resistance (33.3%). As a result, t-AC/Ni achieved peak values of hydrogen production rate (0.35 ± 0.02 L-H2/L-d), energy yield (129 ± 8%), and cathodic hydrogen recovery (93 ± 6%) in MECs. The hydrogen production rate was 84% higher using t-AC/Ni cathode than the control, likely due to the enhanced wettability and a higher fraction of N on the t-AC. Also, the increases in polyvinylidene fluoride (PVDF) binder loadings (from 4.6 mg-PVDF/cm2 to 7.3 mg-PVDF/cm2) demonstrated 47% higher hydrogen productions rates in MECs.
More Related Videos
08:40Synthesis of Metal Nanoparticles Supported on Carbon Nanotube with Doped Co and N Atoms and its Catalytic Applications in Hydrogen Production
Published on: December 6, 2021
09:02Synthesis of Platinum-nickel Nanowires and Optimization for Oxygen Reduction Performance
Published on: April 27, 2018
Related Concept Videos
Catalysis
Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the...
Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...
Reduction of Alkynes to cis-Alkenes: Catalytic Hydrogenation
Like alkenes, alkynes can be reduced to alkanes in the presence of transition metal catalysts such as Pt, Pd, or Ni. The reaction involves two sequential syn additions of hydrogen via a cis-alkene intermediate.