A PHANTOM EVALUATION OF THE USE OF CT AUTOMATIC TUBE CURRENT MODULATION WITH LOW TUBE POTENTIALS FOR IODINATED
Supawitoo Sookpeng1, Colin J Martin2
1Department of Radiological Technology, Faculty of Allied Health Sciences, Naresuan University, Phitsanulok 65000, Thailand.
Abstract:
This paper aimed to investigate effects of different tube voltage and image quality settings on radiation dose and image quality for patients undergoing computed tomography iodinated contrast studies using automatic tube current modulation system and to recommend settings to achieve improved radiation dose and image quality values. A Pagoda phantom with an additional rod of iodine contrast was scanned using different tube voltages and noise index (NI) settings. Size-specific dose estimate (SSDE) and image quality (noise, contrast, contrast-to-noise ratio (CNR) and figure of merit (FOM)) were analysed. Values of SSDE were maintained with similar NI settings. Contrast and CNR were higher for lower tube voltage settings. Better FOM values can be achieved with higher NI settings with the lower kVs. To achieve better CNR and SSDE compared with the standard setting of 120 kV, a 80 kV with an NI setting of 15 was recommended.
More Related Videos
Related Concept Videos
Radiological Investigation I: X-ray and CT
Imaging Studies for Cardiovascular System V: CT
Imaging Studies III: Computed Tomography
Imaging Studies I: CT and MRI
Description of the Procedures
Computed Tomography (CT) scan:
Computed Tomography (CT) scans use X-ray technology to generate detailed images of bones, organs, and tissues. During the scan, the patient lies on a moving table...
Controlled-Current Coulometry: Overview
Computed Tomography
The technique was invented in the 1970s and is based on the principle that as X-rays pass through the body, they are absorbed or reflected at different levels. In the technique, a patient lies on a motorized platform while a computerized axial tomography (CAT) scanner rotates...


