Rapid seafloor changes associated with the degradation of Arctic submarine permafrost

Charles K Paull1, Scott R Dallimore2, Young Keun Jin3

  • 1Science Division, Monterey Bay Aquarium Research Institute, Moss Landing, CA 93039.

Related Concept Videos

Global Climate Change01:50

Global Climate Change

Throughout its ~4.5 billion year history, the Earth has experienced periods of warming and cooling. However, the current drastic increase in global temperatures is well outside of the Earth’s cyclic norms, and evidence for human-caused global climate change is compelling. Paleoclimatology, the study of ancient climate conditions, provides ample evidence for human-caused global climate change by comparing recent conditions with those in the past.
24.9K
Frost Action on Concrete01:27

Frost Action on Concrete

Concrete structures in cold climates, such as those along roadsides, can retain moisture. This moisture makes them susceptible to frost-related damage when temperatures fall below freezing. Adding moisture worsens the damage during temperature fluctuations, leading to repeated freezing and thawing. De-icing salts, spread over these structures to melt ice, add to the freeze-thaw cycle, and draw even more moisture into the concrete.
This freeze-thaw cycle primarily causes surface scaling, where...
163
Green Algae01:21

Green Algae

Green algae, also referred to as chlorophytes, are different from red algae in having the chloroplasts containing chlorophylls a and b, which give them their distinct green hue. However, they lack phycobiliproteins, preventing them from developing the red or blue-green pigmentation seen in red algae. In terms of photosynthetic pigment composition, green algae closely resemble plants and share a close evolutionary relationship with them. Taxonomically Green algae belong to Phylum Chlorophyta in...
246
Temperature Dependent Deformation01:12

Temperature Dependent Deformation

In a nonhomogeneous rod made up of steel and brass, restrained at both ends and subjected to a temperature change, several steps are involved in calculating the stress and compressive load. Due to the problem's static indeterminacy, one end support is disconnected, allowing the rod to experience the temperature change freely. Next, an unknown force is applied at the free end, triggering deformations in the rod's steel and brass portions. These deformations are then calculated and added...
205