High-power narrow-linewidth fiber lasers using optical spectrum broadening based on high-order phase modulation of...

Continuous fiber laser with ultra-high power and narrow linewidth is one of the key devices in the field of high-precision industrial processing, beam combining, and nonlinear frequency conversion. Under the premise of ensuring the signal quality, continuously increasing the output power is the focus of high-power narrow-linewidth fiber lasers. Driven by the white noise or pseudo-random binary sequence (PRBS), using cascaded phase modulations to broaden the spectrum of the seed source to suppress the stimulated Brillouin scattering (SBS) effect in the master oscillator power amplifier (MOPA) structure is an effective solution to increase the output power. However, this type of optical spectrum needs to be optimized, and the randomness of the driving signal causes a self-pulsing effect, which limits the further increase of the output power. In this paper, the influence of the frequency interval and randomness of the driving signal on the SBS effect in the laser system is analyzed. The modulated spectral type can be simply adjusted through changing the bit rate and inversion probability. Combining with high-order phase modulation, an approximate rectangular spectral broadening of the seed source with a tunable bandwidth up to 30 GHz is achieved. Compared with the cascaded white noise case, the output power of this scheme is increased by 600 W under the extended bandwidth of 27 GHz. It is fully verified that the seed source spectrum with high in-band flatness and low randomness can effectively suppress the SBS effect in the fiber laser and increase the output power.