Related Experiment Video
Updated: Sep 30, 2025

Close-Space Sublimation-Deposited Ultra-Thin CdSeTe/CdTe Solar Cells for Enhanced Short-Circuit Current Density and Photoluminescence
Published on: March 6, 2020
Modeling free-carrier absorption in ultrathin III-V solar cells with light management
Abstract:
Ultrathin III-V solar cells with proper light management have become more attractive than their optically thick counterparts as they are less expensive and lightweight, can maintain photon absorption, and have high radiation tolerance for space-related applications. Comprehensive optical modeling efforts have provided pathways to improve device efficiency in ultrathin GaAs solar cells with light trapping structures. Usually, the absorption mechanism known as free-carrier absorption (FCA) is ignored in these models due to the ultrathin layers and the direct bandgap of GaAs. This manuscript reports the significance of considering FCA as a parasitic loss caused by the optical enhancement in highly doped non-active layers between the ultrathin solar cell and backside light trapping structures. We model FCA based on Drude theory in a p-type AlGaAs layer behind ultrathin GaAs solar cells with a planar mirror and cylindrical gratings. Our results show that, depending on the AlGaAs thickness and doping concentration, free carriers will absorb transmitted photons and reduce the backside reflectance, degrading the current and voltage output from ideal conditions. One example shows that for a 300 nm-thick GaAs solar cell, the Ag mirror's peak reflectance decreases nearly 12% when the AlGaAs back layer is 800 nm-thick at a doping concentration of 4x1019 cm-3. Notably, the cylindrical grating designs with 38.5%, 46.5%, and 64.9% AlGaAs coverage resulted in an absolute efficiency reduction of 0.6%, 1.8%, and 2.9% at a doping concentration of 4x1019 cm-3, respectively. This novel study demonstrates that FCA in non-active layers must be properly addressed in the device design to progress the efficiency of ultrathin III-V solar cells with light trapping structures.
More Related Videos
11:26Integrating a Triplet-triplet Annihilation Up-conversion System to Enhance Dye-sensitized Solar Cell Response to Sub-bandgap Light
Published on: September 12, 2014
08:29Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
Published on: January 10, 2017
Related Concept Videos
P-N junction
Modeling of Diode Forward Characteristics
Modeling of Diode Reverse Characteristics
When a reverse voltage applied to a Zener diode exceeds its breakdown voltage, the diode enters the breakdown region. At this point, the...