An Ultrastrong and Antibacterial Silver Nanowire/Aligned Cellulose Scaffold Composite Film for Electromagnetic...

Constructing multifunctional electromagnetic interference (EMI) shielding films with superior mechanical strength has sparked a lot of interest in the fields of wearable electronics. In this work, the conductive silver nanowires (AgNWs) were synthesized and impregnated into the highly aligned cellulose scaffold (CS) fabricated by wood delignification followed by hot-pressing and polydimethylsiloxane (PDMS) dipping processes to obtain the outstanding EMI shielding cellulosic film (d-AgNWs@CS-PDMS). The consecutively conductive pathway of AgNWs was constructed in the microchannels of the CS as a result of the hydrogen bonding between AgNWs and cellulose fibers, which is conducive to the reflection of incident EM waves. The higher degree of nanofiber alignment and the compact conductive network were improved by densification upon hot pressing, which endows the composite film with striking mechanical properties (maximum tensile strength of 511.8 MPa) and superb EMI shielding performance (shielding effectiveness value of 46 dB with a filler content of 21.6 wt %) at the X band (8.2-12.4 GHz). Moreover, the existence of an intensive AgNWs network and the introduction of the PDMS layer improve the hydrophobicity and antibacterial activity of the composite film, avoiding serious health concerns in the long-term wearing. These results demonstrate that the obtained d-AgNWs@CS-PDMS composite film has high potential as an EMI shielding material used for wearable devices.