Research on the Induced Electrostatic Discharge of Spacecraft Typical Dielectric Materials under the ESD Pulse...

Based on polyimide (PI), epoxy resin (EP), polytetrafluoroethylene (PTFE) typical dielectric materials used in spacecraft, a research platform for charge-discharge experiment under strong field was established. The influence of irradiation field strength, beam energy, dielectric thickness, etc., on electrostatic discharge characters of dielectric materials were studied and summarized. The results show that with the increase of field strength, the frequency of induced electrostatic discharge increases, the accumulated charge on the dielectric surface decreases, and the dielectric surface potential decreases; Under the same conditions, PI has the lowest discharge frequency and the highest surface dynamic balance potential. The thicker the dielectric material, the lower the discharge frequency, the higher the surface dynamic equilibrium potential; The shape and size of the background electrodes also affect the discharge frequency. When the area is the same, the sharper the electrode edge, the higher the discharge frequency. When the shape is the same, the larger the grounding area, the higher the discharge frequency. By proposing the induced discharge test method, the function mechanism of spatial environmental factors on the electrostatic discharge of typical dielectric materials are obtained. Comparative analysis on electrostatic properties of different dielectric materials can provide data reference and technical support for spacecraft electrostatic safety and protection.