Performance Comparison of Single and Double Masks: Filtration Efficiencies, Breathing Resistance and CO₂ Content

The emergence of a pandemic affecting the respiratory system has resulted in a significant demand for face masks. Masks have always been mentioned as an effective tool against environmental threats. This includes the use of double masks by large sections of the public, as can be seen during the current global spread of COVID-19. However, there is limited knowledge available on the performance of the various commonly available double face masks used. In this study, we have compared the performance of single and double face configurations. Three types of 3-ply face mask (FM), three types of fabric face mask (CM) and nine configurations of these face masks were investigated based on morphology, filtration efficiencies, breathing resistance and carbon dioxide (CO₂) content. The filtration efficiencies of the double face masks are enhanced when combined with a fabric mask, and were found to improve by 500% compared to those of a fabric mask. The lowest breathing resistance among the double masking was observed in the combination of FM1 and fabric face masks. From the results, it was found that all combinations of double face mask are suitable to use since the measurements indicate that the breathing resistance and CO₂ contents are still lower than the acceptable value set by the Malaysian Standard (MS 2323:2010) and European Standard (EN 149:2001 + A1:2009). The performance of double masks is comparable with that of N95 respirators. The double masking combination can be used as an alternative method to reduce inhalation exposure to airborne contaminants.