Related Experiment Video
Updated: Sep 27, 2025

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Exploring the Properties of Micronized Natural Zeolitic Volcanic Tuff as Cosmetic Ingredient
Emilia Neag1, Zamfira Stupar1, Anamaria Iulia Torok1
1National Institute for Research and Development of Optoelectronics Bucharest INOE 2000, Research Institute for Analytical Instrumentation, 67 Donath Street, 400293 Cluj-Napoca, Romania.
Abstract:
This study explores the characteristics of a micronized natural zeolitic volcanic tuff (MZ) as ingredient in cosmetic formulations. In particular, the purpose was to prepare and investigate the organoleptic and physicochemical properties of two representative cosmetic formulations containing MZ. The MZ samples were characterized using X-ray fluorescence (XRF), X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) spectroscopy. pH, cation exchange capacity (CEC), apparent density, chemical composition and particle size distribution of MZ samples were also determined. The micronization treatment applied did not produce significant structural and physicochemical changes with respect to the raw zeolitic volcanic tuff. The prepared formulations containing 5% MZ with different particle sizes (100-125 µm and 125-250 µm) were subjected to preliminary and accelerated stability tests, and the pH and organoleptic properties were also evaluated. The cosmetic formulations presented a pH of 4.3, a pleasant touch, good spreadability, easy application on skin, no color alteration and a good stability after 15, 30 and 60 days of storage at room temperature, low temperature and freezer during the accelerated stability tests. The obtained results endorse the MZ as suitable for the development of formulations exploiting the clinoptilolite properties as a cosmetic ingredient.
Related Concept Videos
Pozzolans
Fly ash is...
Porosity in Cement Paste
The balance of water to cement in the mix is...
Additives and Fillers in Concrete
The...
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...

