Related Experiment Video
Updated: Sep 27, 2025

Emission Spectroscopic Boundary Layer Investigation during Ablative Material Testing in Plasmatron
Published on: June 9, 2016
Study on Shielding and Radiation Resistance of Basalt Fiber to Gamma Ray
Baoming Ding1, Lei Zhang2, Jiaqi Liu2
1School of Earth Sciences and Resources, China University of Geosciences, Beijing 100083, China.
Abstract:
In this study, four basalt rocks were selected to produce continuous fibers, the chemical composition of basalt rocks and the corresponding fibers were compared using the XRF, the results reveal that the content of the chemical component present in the basalt fibers is consistent with basalt rocks. The mass attenuation coefficient of different fibers was analyzed using the XCOM program, the results indicate that when the incident electron energy is 0.01~0.1 MeV, fiber mass attenuation coefficient is found to be positively correlated with the content of Wt (Fe2O3 + MnO + TiO2 + CaO + K2O). The structure and properties of the fibers irradiated by different absorption doses of gamma rays were studied using the SEM, EDX and FTIR, the results indicate that irradiation produces no effect on the basalt fiber structure, surface morphology, and contents of the surface elements, the mass loss rate of the fiber was much less than 1%, fiber tensile strength and elastic modulus increased 4.7-7.5% and 3.9-9.1%, respectively, but the elongation at break of fiber decreased 4.18-10.97%. Two selected basalt fiber cloths of thickness 0.12 and 0.28 mm were irradiated with gamma rays of energies of 100 and 120 keV to examine the shielding property of basalt fibers against the gamma rays, when the energy was 100 keV, the shielding ratios of the fiber cloths were 18.9% and 22.5%, respectively, but when the energy was 120 keV, the shielding ratios of the fiber cloths decreased significantly and were at 8.7% and 10.4%, respectively. When the irradiated electron energy is 100 keV, the shielding ratio for basalt fiber cloths measuring 0.12 and 0.28 mm can reach up to 38.9% and 46.3% of that of the 0.5-mm lead plate, respectively.
More Related Videos
09:18Laser-heating and Radiance Spectrometry for the Study of Nuclear Materials in Conditions Simulating a Nuclear Power Plant Accident
Published on: December 14, 2017
05:56Construction of a Compact Low-Cost Radiation Shield for Air-Temperature Sensors in Ecological Field Studies
Published on: November 6, 2018
Related Concept Videos
Nuclear Power
Nuclear Fuels
Nuclear fuel consists of a fissile isotope, such as uranium-235, which must be present in sufficient quantity to provide a...
Biological Effects of Radiation
Types of Radioactivity
Alpha (α) decay is the emission of an α particle from the nucleus. For example, polonium-210 undergoes α decay:
Fiber Reinforced Concrete
Radiation Pressure: Problem Solving
The average value of the rate of momentum transfer divided by the absorbing area represents the average force...
Absorption of Radiation