A Preliminary Color Study of Different Basil-Based Semi-Finished Products during Their Storage
Federica Turrini1, Emanuele Farinini1, Riccardo Leardi1
1Department of Pharmacy, University of Genoa, Viale Cembrano 4, 16148 Genoa, Italy.
Abstract:
Basil-based semi-finished products, which are mainly used as an intermediate to produce the typical pesto sauce, are prepared and exported all over the world. Color is a fundamental organoleptic requirement for the acceptability of these semi-finished products by the manufacturers of the pesto sauce. Some alternative formulations, which adjust the typical industrial recipe by both changing the preservative agent (ascorbic acid, citric acid, or a mixture of both) and introducing a preliminary thermic treatment (blast chilling), were evaluated. In this work, a fast and non-destructive spectrophotometric analysis, to monitor the color variations in these food products during their shelf-life, was proposed. The raw diffuse reflectance spectra (380-900 nm) obtained by a UV-visible spectrophotometer, endowed with an integrating sphere, together with the CIELab parameters (L*, a*, b*) automatically obtained from these, were considered, and elaborated using multivariate statistical analysis (principal component analysis). From this preliminary study, blast chilling, together with the use of ascorbic acid, proved to be the best solution to better preserve the color of these products during their shelf-life.
Related Concept Videos
Fixation and Sectioning
The simplest type of preparation is the wet mount, in which the specimen is placed in a drop of liquid on the slide. A liquid specimen can be directly deposited on the slide using a dropper. Solid specimens, such as skin scraping, can be placed on the slide before adding a drop of liquid to prepare the wet mount. Sometimes the liquid is simply water, but stains are often added...
Sample Handling
Samples should be transported carefully from collection points to the laboratory. They should be properly sealed and clearly labeled to prevent cross-contamination. To preserve the sample integrity, optimal temperature conditions during transport are essential. This could involve using...


