Related Experiment Video
Updated: Sep 26, 2025

Polymer Microarrays for High Throughput Discovery of Biomaterials
Published on: January 25, 2012
A dataset for spectral radiative properties of black poly(methyl methacrylate)
Farid Alinejad1, Hadi Bordbar1, Michalina Makowska1
1School of Engineering, Aalto University, Finland.
Abstract:
The main objective of this article is to provide the spectroscopic radiative properties of black poly(methyl methacrylate) (PMMA) including transmissivity, absorption coefficient, and complex index of refraction. To perform the required spectroscopy, four ultra-thin samples with thicknesses of , , , and µm were prepared. Then, by using UV-Vis-NIR and FTIR spectrometers, the spectrum of transmissivity was measured for the wavelength regions of 0.25 to 2.5 and 2.5 to 25 µm, respectively. Applying modified Beer's law, the absorption coefficient of black PMMA was extracted. To obtain the refractive index, first the reflectivity of the 6 mm sample of black PMMA measured by UV-Vis-NIR spectrometer. Then, applying the Kramers-Kronig transform and Fresnel relation, the refractive index of black PMMA was extracted. To investigate the effect of temperature on the absorbance of the material, ATR-FTIR spectroscopy was done for the temperatures below melting point (i.e., 160 C). Finally, a set of data for effective absorption coefficient as a function of depth from the sample surface and source temperature was proposed to be used in pyrolysis modeling.
Related Concept Videos
Polymer Classification: Crystallinity
Crystalline domains are the regions where polymer chains are aligned in an orderly manner and held together in proximity by intermolecular forces. For example, chains in the crystalline domains of polyethylene and nylon are bound together by van der Waals...
Polymer Classification: Architecture
Polymers: Molecular Weight Distribution
Polymer Classification: Stereospecificity
Molecular Weight of Step-Growth Polymers
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...

