Dynamic Modulation of THz Absorption Frequency, Bandwidth, and Amplitude via Strontium Titanate and Graphene

A multi-functional broadband absorber based on graphene and strontium titanate (STO) film was designed. Additionally, the frequency, bandwidth, and amplitude of the absorber could be tuned by adjusting temperature and Fermi level of the graphene. By using the finite-difference time-domain (FDTD) method, the numerical calculation result shows that, when keeping the device temperature at 230 K and setting graphene Fermi level to be 1 eV, three absorption peaks at 1.72 THz, 2.08 THz, and 2.59 THz were realized and combined into a broadband absorption from 1.68 to 2.74 THz. As the STO temperature was increased from 230 K to 310 K, the center frequency moved from 2.2 THz to 2.45 THz; correspondingly, the broadband absorption range was widened from 1.06 THz to 1.24 THz. When the temperature was fixed at 230 K and the graphene Fermi level was tuned from 1 eV to 0.7 eV, the absorption bandwidth decreased from 1.06 THz to 0.64 THz. While the Fermi level was tuned continually to be 0.01 eV, only a single absorption peak with an absorption rate of 0.29 existed. The broadband absorption and tuning mechanism of the absorber were analyzed using impedance matching theory. Furthermore, we also studied the effect of incident angle and polarization direction on the properties of the absorber. The multi-functional tunable absorber provides potential applications for the design of more efficient terahertz functional devices in the future.