The removal of 3-monochloropropane-1,2-diol ester and glycidyl ester from refined-bleached and deodorized palm oil...

Palm oil has fulfilled most of the oil needs in the food sector in the world. However, palm oil is indicated to contain small amounts of compounds that are harmful to humans, especially to infants. These toxic contaminants are 3-monochloropropanediol (3-MCPD) esters and glycidyl esters (GE), which are formed during the deodorization of palm oil at high temperatures. This study aims to reduce the 3-MCPD ester concentration in refined, bleached, and deodorized palm oil (RBDPO) through adsorption using activated carbon. The activated carbons were treated with heat and acid-washing using HCl at various concentrations and were characterized. The treatment altered the physicochemical characteristics of the activated carbon (surface area, pore volume, pH_PZC, and CEC), resulting in the enhancement of its adsorption characteristics (adsorption capacity). The activated carbon treated with 2 N HCl (AC 2 N) was chosen as the proper adsorbent, due to better surface area, better pore volume, highest CEC value, and better positive charge in RBDPO. The 3-MCPD and GE adsorption capacity of AC 2 N was 1.48 mg g^-1 and 29.68 mg g^-1, respectively. The adsorption ability of pretreated activated carbon towards 3-MCPD esters was examined in a batch system at various adsorption temperatures. The 3-MCPD ester concentration in RBDPO was successfully reduced by up to 80% at 35 °C using the activated carbon treated with 2 N HCl solution. On the other hand, the activated carbon was able to reduce the other contaminant of GE in RBDPO up to 97% from the initial concentration of GE.