Related Experiment Video
Updated: Sep 25, 2025

Resonance Raman Spectroscopy of Extreme Nanowires and Other 1D Systems
Published on: April 28, 2016
Nanosecond pulsed single longitudinal mode diamond Raman laser in the 1.6 µm spectral region
Abstract:
We demonstrate the first nanosecond pulsed single longitudinal mode (SLM) intracavity-pumped diamond Raman laser, to the best of our knowledge. The eye-safe coherent source at 1634 nm, which was converted from the actively Q-switched 1342 nm Nd:YVO4 laser, yielded 4.35 W of multimode average output power with a pulse duration of 6 ns and peak power of 29 kW. By exploiting the spatial hole burning free gain mechanism in the Raman media, stable SLM operation was observed at low output power (0.46 W) for the free-running case. Furthermore, by incorporating an etalon in the fundamental standing-wave cavity, the spectral linewidth of the fundamental field was suppressed substantially below the diamond Raman gain linewidth and slightly less than the free spectral range of the mm-scale Raman resonator. Thereby, a much higher SLM output power of 1.63 W was obtained with a pulse duration of ∼9 ns and a spectral linewidth of ∼77 MHz.
More Related Videos
Related Concept Videos
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Raman Spectroscopy: Overview
However, a small fraction of the scattered light exhibits a frequency shift due to the exchange of energy between the incident photons and...
NMR Spectrometers: Radiofrequency Pulses and Pulse Sequences

