Electrocoagulation and electrooxidation technologies for pesticide removal from water or wastewater: A review

Pesticides are known to be threats to the environment and human health. Excessive use of pesticides in agricultural practice can contaminate water bodies, leading to cancer, asthma, neurological disorders, reproductive defects, and hormonal disruption. Electrochemical methods such as electrocoagulation and electrooxidation can be used for pesticide removal due to their numerous advantages such as high efficiency, less sludge production, and low operational cost. During electrocoagulation, dissolution of anode metals results in metal hydroxide complexes, which precipitate with the contaminant present in the reactor. Simultaneously, electro-flotation occurs at the cathode and results in the evolution of hydrogen gas bubbles, leading to flotation of floc to the top surface of the reactor. This review focuses on the removal mechanisms, kinetics, modeling, effects of influencing factors, and sludge characterization of pesticide removal using electrocoagulation and electrooxidation. Major influencing factors include cell configuration, electrode material, current density, pH, supporting electrolyte concentration. In general, aluminum and iron are the most common electrodes used for pesticide removal using electrocoagulation, while boron-doped diamond was used to a far greater extent as the electrode in electrooxidation studies. Greater than 99% removal efficiency was observed in both processes. Overall, this review summarizes the use of electrochemical methods for pesticide removal and offers valuable information to researchers in this area of study.