Related Experiment Video
Updated: Sep 25, 2025

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Oxidative removal of stabilized landfill leachate by Fenton's process: process modeling, optimization & analysis of
N Jegan Durai1, G V T Gopalakrishna2, V C Padmanaban3
1Department of Civil Engineering, Kamaraj College of Engineering & Technology Madurai Tamilnadu India.
Abstract:
In this study, the stabilized landfill leachate which has a BOD : COD ratio of 0.045 was treated using Fenton's process. The effect of process parameters like reaction time, pH, dose of FeSO4 and dose of H2O2 was estimated using One Factor At a Time (OFAT) and the linear, interactive and quadratic effects between the factors were studied using Face Centered Central Composite Design (CCF). In the OFAT approach, reaction time: 5 minutes, pH: 3.0, dose of FeSO4: 30 mM, and dose of H2O2: 30 mM were optimized. In CCF, the statistically optimized model shows maximum removal of organic substances at an FeSO4 concentration of 14.44 mM, pH 3.0 and 29.12 mM of H2O2. The regression co-efficient R 2 = 0.9079, adj R 2 = 0.854 and adequate precision = 14.676. The degradation of organic substances was assessed by measuring the Chemical Oxygen Demand (COD). Total Organic Carbon (TOC) and Gas Chromatography-Mass Spectroscopy (GC-MS) were investigated for the sample corresponding to the maximum COD reduction.
More Related Videos
05:52Resource Recycling of Red Soil to Synthesize Fe2O3/FAU-type Zeolite Composite Material for Heavy Metal Removal
Published on: June 2, 2022
15:19Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
Related Concept Videos
Bioremediation
Extraction: Advanced Methods
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...