Enhancing ink adhesion of specialty paper using an interpenetrating polyvinyl alcohol-blocked polyurethane polymer...

The printing quality and strength of specialty papers such as money, maps, newspapers and bank notes have been a significance challenge in recent years. The adhesive effect between ink and paper is depend on both the secondary binding force between the molecules and the mechanical anchoring effect of the ink on the paper. Also, the porous and fibrous structures of base paper restrain its application in printed products because of the strong capillary effect leading to the diffusion of ink particles. To address the problems involved in ink diffusion and mechanical reinforcement, surface sizing is an attractive choice from the perspective of paper handling. Herein, the surface sizing system of specialty paper with an interpenetrating polyvinyl alcohol-blocked polyurethane polymer network was applied to fabricate paper of high ink adhesive properties. In the case of the same external factors (gluing temperature, drying time, etc.), the surface sizing effect of paper samples (sizing with TBPU, polyvinyl alcohol and TBPU/PVA system) were evaluated by infrared spectroscopy, X-ray photoelectron spectroscopy, water contact angle measurements and scanning electron microscopy. Some of the pure cotton pulp paper with surface sizing treatment was treated via adhering inks to paper by spraying, smearing and soaking. The bonding strength was tested by peel-off tape tests, soaking tests, and simulated washing tests. The results showed that the water contact angle of the sized-paper increased from 67.6° to 89.7°. The mechanical properties had been greatly improved after treatment and SEM, AFM and XPS analyses indicated an increase in surface roughness and the oxygen-containing polar groups (C[double bond, length as m-dash]O, C-OH, -NH-COO- and COOH) enhanced the fixation of ink particles on the fiber surface. These tests indicated that the novel composite system of TBPU/PVA could endow specialty paper with superb mechanical properties and more than 90% ink retention rate. All these advantages of this composite system may contribute to its wide application in the fields of papermaking and printing.