Related Experiment Video
Updated: Sep 24, 2025

Microfluidic Devices for Characterizing Pore-scale Event Processes in Porous Media for Oil Recovery Applications
Published on: January 16, 2018
A practical adsorption model for the formation of submerged oils under the effect of suspended sediments
Zhaowei Wang1, Wenchao Yang2, Yanqiu Zhang1
1College of Environmental Science and Engineering, Dalian Maritime University Dalian 116026 China sunb88@dlmu.edu.cn.
Abstract:
Oil sediment interactions play an important role in the formation of submerged oils in coastal marine environments. Thus, the formation processes of submerged oils under the effect of suspended sediments were investigated in this study. Batch experiments were conducted to assess the role of adsorption processes on the suspended sediments in controlling levels of formation of submerged oils using three kind of Bohai crude oils [obtained from the Liaohe oilfield (LX), Bohai south regional oilfield (YYH) and Bohai central regional oilfield (YYS)]. The results showed that the saturated adsorption capacities by sandy sediments were 568, 429 and 352 mg g-1 for LX, YYH and YYS, respectively. Kinetic studies showed that the adsorption rate was about 0.002 mg g-1 min-1 in the first 200 minutes, and the maximum proportion of the submerged oils formed was 43%, 40% and 34% for LX, YYH and YYS, respectively. Partitioning of oils occurs between solid and solution phases during the oil sediment interactions, and always involving a distribution coefficient (K d). Importantly, an adsorption model was proposed in this study for predicting the formation of submerged oils with most of the experimental data fitting the model defined by a zone with K d values of 0.5 and 1.5 mL mg-1. Those results can help assess the fate and distribution of oil leakages in marine environments.
Related Concept Videos
Solubility
A solution is a homogeneous mixture composed of a solvent, the major component, and a solute, the minor component. The physical state of a solution—solid, liquid, or gas—is typically the same as that of the solvent. Solute concentrations are often described with qualitative terms such as dilute (of relatively low concentration) and concentrated (of relatively high concentration).
In a solution, the solute particles (molecules,...
Entropy and Solvation
Theories of Dissolution: The Danckwerts' Model and Interfacial Barrier Model
Colloidal precipitates
Colloids
Theories of Dissolution: Diffusion Layer Model
This process starts with a thin layer, saturated with the drug, forming at the interface between the solid and liquid. The solute then diffuses from this layer into the main solution. The Noyes-Whitney equation suggests that the rate of dissolution relies on the diffusion...

