Related Experiment Video
Updated: Sep 24, 2025

High-resolution Thermal Micro-imaging Using Europium Chelate Luminescent Coatings
Published on: April 16, 2017
Effects of interfaces and current spreading on the thermal transport of micro-LEDs for kA-per-square-cm current
Chengcheng Li1, Zhizhong Chen1, Fei Jiao1,2
1State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Peking University Beijing 100871 China zzchen@pku.edu.cn +86 13167388462.
Abstract:
The three-dimensional thermal characteristics of micro-light-emitting diodes (μLEDs) on GaN and sapphire substrates were studied with forward-voltage methods, thermal transient measurements, and infrared thermal imaging. The μLEDs on the GaN substrate showed an approximately 10 °C lower junction temperature and smaller amplitude of the K factors than those on the sapphire substrate under the current injection level of 4 kA cm-2. The thermal transient measurement showed that the spreading thermal resistances of the mesa, the GaN epilayer, and the interface of the GaN/substrate were reduced significantly for μLEDs on the GaN substrate because of the high-quality GaN crystal and the homogeneous interfaces. The infrared thermal images showed lower total average junction temperatures and more uniform temperature distributions for the μLEDs on the GaN substrate, which were also simulated with APSYS software. The thermal transport mechanisms are discussed for the lateral and vertical directions in the μLEDs.
Related Concept Videos
Carrier Transport
Drift Current:
The drift of charge carriers is started by an external electric field (E). Charged particles, such as electrons and holes, experience an acceleration between collisions with lattice atoms. For electrons, this results in a drift velocity (vd) given by:
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Boundary Conditions for Current Density
Induced Electric Fields: Applications
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...

